DI-STRIP Master-Slave Standard DIN 49 440 (DIN)
back
|
|
- If the master equipment is switched, the slave sockets are also switched (together, with a short delay to the master). Enables easy switching on and off of several difficult to access pieces of equipment. Switching thresholds can be set from outside via potentiometer. Note: - Power consumption of the master equipment must be constantly over the switching- on threshold. When switching off the master equipment, the power consumption must fall below the switching-off threshold. - 19” installation option (with length 483 mm) - Socket rotation: 45° - Cable: HO5VV-F 3G 1.5 mm² - Moulded right angle plug Material / Finish Casing: closed sheet steel extrusion, zincplated, powder-coated texture Plastic parts: Vampamid 6 0024 VO (UL94), recyclable Internal conductor: full-length busbar, brass Dimensions Socket spacing: 50 mm Height: 45.5 mm Casing width: 44.4 mm (= 1 HU) Cable: 2.5 m Approvals - CE Label in accordance with low voltage directive 2006/95/EEC EMC Directive 2006/108/EEC - Innova-GS - CB-scheme - VDE Color RAL 7035 light-grey Plastic parts: RAL 7035 light-grey Load rating Max. 250 Vac/16 A Technical data Threshold setting range On: 20 mA - 200 mA (approx. 55 mA, supply status) Off: 16 mA - 160 mA (approx. 44 mA, supply status) Switching delay 550 ms ±/-20 % Electronic module, 2-pole switching Supply schedule 1 socket strip 2 mounting brackets 2 19” mounting brackets (additional with 19” installation option) |
|||
|
|
|
Print page
top