back
|
|
- The “Safety Standard” models consist of a combined overvoltage protection/mains filter element. - For protecting against transient overvoltages from the mains, which, for example, are caused by switching machines on and off. - With critical overvoltages the mains is separated. - Once the safety arrester has been triggered the green function display goes out. The socket strip can then no longer be used. Send the socket strip to the manufacturer for the safety arrester to be replaced! - The safety effect of the type 3 test category and requirements category “D” is to protect the equipment, i.e. precision protection. The protection devices of the test and requirements categories 1 and 2 and B and C must be preconnected in the building installation to ensure optimum protection. - High-frequency glitches are generally caused by switching processes in an operation from 100 kHz to 5MHz. - This high-frequency rate overloads the mains frequency and affects adjacent electronic equipment. The mains filter attenuates this high-frequency rate. - The attenuation behaviour is harmonized with the typical interference spectrum. - 19” installation option (with length 483 mm) - Socket rotation: 45° - Cable: H05VV-F 3G 1.5 mm² - Moulded right angle plug Material / Finish Casing: closed sheet steel extrusion, zincplated, powder-coated texture Plastic parts: Vampamid 6 0024 VO (UL94), recyclable Internal conductor: full-length busbar, brass Dimensions Socket spacing: 50 mm Height: 45.5 mm Casing width: 44.4 mm (= 1 HU) Cable: 2.5 m Approvals - CE Label in accordance with low voltage directive 2006/95/EEC EMC Directive 2006/108/EEC - Innova-GS - CB-scheme - VDE Color Final digit of order number .1: RAL 7035 light-grey Final digit of order number .6: Casing, RAL 2003, pastel orange Plastic parts: RAL 7035 light-grey Technical data Mains voltage: 230 VAC Nominal current: max. 16 A Cut-off discharge current (8/20 ?s): 10 kA Reaction time: ‹ 25 ns Protection level (with 100 A varistor peak current): - L with respect to N: ‹ 800 V - L/N with respect to PE: ‹ 1500 V Overvoltage protection - Test category: Type 3 in acc. with DIN EN61643-11 - Feature class: D - In acc. with VDE 0675-6 Mains filter - In acc. with VDE 0565 (EN 60939) Supply schedule 1 socket strip 2 mounting brackets 2 19” mounting brackets (additional with 19” installation option) |
|||
|
|
|
Print page 
top