back
|
|
The transponder cards are read into the administration software using the desktop reader. This enables the later configuration of the access media in the system (lock plan creation). The desktop reader is connected via the RS-232 interface with the PC on which the administration software is installed. The transponder card is inserted in the read-out unit for reading the transponder ID. The reading process can then be initiated in the administration software by hitting a key. Technical data - Power supply: 12V +- 10% (DC max. 400mA) via low voltage socket - Nominal current: 80mA (DC) - RS232 interface: RS 232 cable (RXD, TXD, GND, reader present, PC present), 38,400 baud - Connection cable: (reader – read-out unit) 8-pole, 250 cm, UL stranded wire AWG 26 |
|||
|
|
|
Print page 
top