■ Double-wall outdoor enclosure for attaching to a basic cabinet
■ With EMC sealing
■ Naturally vented rear panel
■ Naturally vented roof
■ All bolting and connection elements situated inside
■ Hinged solar protection roof
■ Doorstop changeable
■ Door with lock and release lever for extrusion half-cylinder with saw protection, triple interlocking system
■ Door lock-in, lock-out with opening angles of 90° and 135°

For the installation of
■ Components in accordance with IEC 297-3 (19") or IEC 917 (metric)
■ Non-standard equipment with max. installation width of 535 mm

Load rating
■ 4000N static

Standards
■ Built-in units in accordance with IEC 297-3 (19") and IEC 917 (metric)
■ Earthing in accordance with VDE 0100

Tests
■ Environmental test in accordance with IEC 68-2-1, IEC 68-2-2, IEC 68-2-5, IEC 68-2-56
■ Vibration tested in accordance with IEC 68-2-6
■ Earthquakeproof to zone 4 in accordance with Telcordia GR-63-CORE
■ Shielding attenuation in accordance with IEC 61 587-3 at least 25 dB

Material / Finish
■ Basic rack: extruded aluminium AlMgSi0,5
■ Corner piece: die-cast aluminium
■ Internal cover panel: aluminium AlMg 3, 1.5 mm thick, chrome-plated
■ External cover panel: aluminium AlMg 3, 2 mm thick, chrome-plated, powder-coated front quality in accordance with GSB International, coarse textured
■ Plinth frame: zinc passivated sheet steel
■ Plinth cover panel: hot-galvanized (zinc-coated) sheet steel DX51 D + Z 140, 1.5 mm
Colour
■ RAL 7035 light grey

Supply schedule
1 Body consisting of basic rack, cover, base, rear panel, 2 corner extrusions
1 Rear cover panel
1 Solar protection roof
1 Front door, opens to the right, closed
1 Plinth frame 210 mm high, with 1 front and 1 rear removeable panel
1 Earthing set
1 Add-on set
1 Cable entrance panel, closed

How supplied
■ assembled

Please note
Various cabinet combinations can be configured from the same basic modules.
Double or triple cabinets can be formed from the extension of one or two add-on cabinets to the basic cabinet. The extension is made on the side cover panel.
These combinations are also possible with an add-on enclosure mounted on the right or the left.
The extension is made on the side cover panel.

top