■ Double-wall outdoor enclosure
■ With EMC sealing
■ With air-to-air heat exchanger with 1 48 VDC fan for the outer and inner air circulation, thermostat controlled
■ Active vented and ribbed side and rear panels
■ All bolting and connection elements situated inside
■ Hinged solar protection roof
■ Doorstop changeable
■ Door with lock and release lever for extrusion half-cylinder with saw protection, triple interlocking system, closed
■ Door lock-in, lock-out with opening angles of 90° and 135°
■ Sound pressure level less than 55 dB(A) at a distance of 1 m in accordance with ISO 7779

For the installation of
■ Components in accordance with IEC 297-3 (19") or IEC 917 (metric)
■ Non-standard equipment with max. installation width of 535 mm

Load rating
■ 4000N static

Standards
■ Built-in units in accordance with IEC 297-3 (19") and IEC 917 (metric)
■ Earthing in accordance with VDE 0100
■ IP protection in accordance with EN 60529
■ Sound pressure in accordance with ISO 7779

Degree of protection
■ IP 55

Tests
■ Environmental test in accordance with IEC 68-2-1, IEC 68-2-2, IEC 68-2-5, IEC 68-2-56
■ Vibration tested in accordance with IEC 68-2-6
■ Earthquakeproof to zone 4 in accordance with Telcordia GR-63-CORE
■ Shielding attenuation in accordance with IEC 61 587-3 at least 25 dB

Material / Finish
■ Basic rack: extruded aluminium AlMgSi0,5
■ Corner piece: die-cast aluminium
■ Internal cover panel: aluminium AlMg 3, 1.5 mm thick, chrome-plated
■ External cover panel: aluminium AlMg 3, 2 mm thick, chrome-plated, powder-coated front quality in accordance with GSB International, coarse textured
■ Plinth frame: zinc passivated sheet steel
■ Plinth cover panel: hot-galvanized (zinc-coated) sheet steel DX51 D + Z 140, 1.5 mm
Colour
■ RAL 7035 light grey

Supply schedule
1 Basic rack with base and 2 corner extrusions
1 Double-wall, ribbed rear cover panel with internal air baffle
2 Double-wall, ribbed side cover panels with internal air baffle
1 Fan module with 2 fans 48 V DC, thermostat controlled for air circulation inside/outside
1 Solar protection roof
1 Front door, opens to the right, closed
1 Plinth frame 210 mm high, with 2 side cover panels, with 1 front and 1 rear removeable panel
1 Earthing set
1 Cable entrance panel, closed

How supplied
■ assembled

Princible of the integrated heat exchanger
■ Integration of the heat transfer systemin the outer panels
■ Installation of fans and electronic control in the roof
■ Optimal layout of air intake and air outflow causes lowest wind intake and elimination of airflow disruption

top