back
| RMS |
| 1. What sensors does RMS support? |
| • Temperature • Humidity • Door contacts • Smoke detectors • Water sensors • Shock • Movement sensors • Surge protectors, AC |
| 2. Can external sensors be connected? |
| Yes, but only to the digital inputs. |
| 3. Is the required software included in the package and how much does it cost? |
| Software is included in the supply schedule. |
| 4. Can the RMS be integrated into a network environment? |
| Yes. |
| 5. How many sensors can be connected per RMS? |
| 2 x analogue, 8 x digital |
| 6. How many outputs are there? |
| 3 x digital relay outputs (max 3A). |
| 7. What requirements does the system have? |
| A terminal and a terminal program are required for configuring RMS Compact, and connection to a Network Management Station (NMS) or the supplied viewer/programmer software are required for operation. Following is a description of all required components and a list of the most used Network Management Stations: • The components of your RMS Compact standard package • Connection to a 10baseT Ethernet network • An SNMP-based management station • For configuring the RMS Compact SNMP agents: A dumb terminal or a PC with an emulation programme that runs with 9600 baud, e.g. Windows 95/98/NT HyperTerminal or the supplied TerraTerm software • An RS232 communication port on your PC or terminal • Network identification values for the RMS Compact: IP address Network mask NMS IP address Community definitions Gateway/router IP address on the same segment as the RMS Compact. |
top